September 1, 2009

The G5 Twin was designed from the ground up to provide the best refrigerant recovery speeds in all conditions with the smallest size portable unit.
115 VAC, 60 Hz, 10 Amps

Features:

• Handles most all refrigerants including R410a
• Lightweight - just 24lbs.
• Rugged case with soft gripping handle
• High speed/high pressure turbine fan - over 600 cfm
• Heavy duty 1/2 HP motor, high torque - ball bearing
• Heavy duty crankcase isolated from refrigerant
• Modular construction for easy repair
• Twin cylinders
• Simple two valve control
• Easy to clean filter screen
• Pumps liquid and vapor without throttling
• Field serviceable: easy to replace gauges

(Click image for more details.)

2-Valve Digital Manifold with Case and 60" Kobra Hoses

Digital manifold with superheat and subcooling combining JB's leading edge

Superheat/subcooling gauge with our 2-valve manifold. 3 tools in 1.

This new "intelligent" manifold offers high tech features with the rugged quality you expect from JB. Advanced software make this unit easy to use and a must have for any technician.

Features:

• Displays pressure, superheat, temperature, and subcooling on digital display
• Shows low side and high side pressures in 2 separate displays
• Superheat/subcooling measurement abilities built into the manifold
• Shows superheat and subcooling simultaneously
• Provides maximum, minimum, and average values for any display
• 2 temperature sensors to measure temperature drop across a cooling coil
• All the features of any standard manifold
• 1 key to work on up to 32 refrigerants
• Gauges are pulsation proof and accurate at any elevation from sea level to 16,000 feet
• Auto calibrates to zero for the elevation each time the manifold is turned on without pressure

(Click image for more details.)

Innovative infrared technology delivers enhanced sensitivity, selectivity, and longer life. This next generation refrigerant leak detector uses an innovative infrared absorption sensing cell that is extremely sensitive to all refrigerants - and only - refrigerants. D-Tek Select maintains that sensitivity over time for consistent, accurate, and reliable performance, even with the newer refrigerant blends. Best of all, the sensing cell lasts for approximately 800 hours - almost 10 times longer than the original D-Tek sensor - to lower your cost of ownership and improve job site productivity. Additional enhancements include a charging status indicator, sensor failure indication, and NiMH (nickel metal hydride) batteries. All in an easy-to-use unit with the quality and durability you've come to expect from INFICON.

Features:

• 0.10 oz. (3 gram)/year sensitivity
• Equally sensitive to all refrigerants, including R-22, R-134a, R410a, F507 (AZ-50), and all CFCs, FCFCs, and HFCS
• 800-hour infrared cell life for low cost of ownership
• Infrared cell does not weaken over time, so response remains consistent and accurate
• Selective to refrigerants only; will not react to smoke, humidity, airflow, or temperature changes
• High-efficiency air sampling pump provides quick response and quick clearing ("zeroing")
• On-board diagnostics indicate charging status and warn of low battery or infrared cell failure
• NiMH power stick is environmentally friendly, won't corrode, and provides greater charging capacity
• Includes hard plastic case, NiMH power stick, 12V and 120V adapter/recharger, tip filters and infrared cell
• Made with pride in the USA

(Click image for more details.)

Features:

• Infrared sensor - Fast, accurate, and versatile. Long life expectancy
• Superior sensitivity - Toggle between three levels of sensitivity down to 0.1 oz/year
• Fast warm up - Only 30 seconds between start up and detecting
• Automatic re-calibration - Finds leaks even with refrigerant in the air surrounding the leak
• Peak hold - Peak reading indicator with manual reset to clear
• Moisture blocking filter keeps water and other contaminants out
• Easy filter replacement
• Ten extra filters included
• Rubberized case
• Works with all CFC, HFC, and HCFC refrigerants
• Fast acting
• Bright and clear LED bar graph and beeper indication
• Entire sensor arm is non-conductive
• Low battery LED
• Auto-off after 10 minutes
• 8 hour battery life to last the whole work day
• Rechargeable lithium ion polymer battery
• Wall charger included
• Car charger included

(Click image for more details.)

The H-10G is the latest generation of the original General Electric design that has earned recognition as the industry's standard for field service leak detectors. This rugged, 115 volt powered, leak detector is the most reliable field service instrument of its type. The H-10G will detect chlorine and fluorine based refrigerants. The H-10G uses a unique heated diode sensor that is the most powerful technology available for leak detection. An air pump inside the H-10G provides a controlled volume sample from the area being tested. The H-10G comes with a reference leak and instruction manual.

• Two leak signals - 80 dB horn in the control unit and flashing light in the probe tip
• Air flow indicator in probe tip
• On/off power switch
• Protective case with fold-away cover
• Flexible probe assembly
• Reliable sensor
• Top mount controls
• Easily accessible reference leak
• Easy sensor and filter replacement
• Dimensions: 2.7" D x 5" W x 8.5" L
• Weight: 3.4 lbs

(Click image for more details.)

Features:

• 1/2 HP, 115 VAC, 60 Hz, 1725 RPM motor
• Capacitor start, thermal overload protected motor
• Finned aluminum housings for lower operating temperature
• Break resistant steel handle with cushioned cool-grip
• Lift loop
• All brass fittings
• All metal construction
• Housing protected drain valve
• 2 stage, direct drive
• 25 micron field tested (thermistor gauge reading)
• Check valve prevents oil backflow during power failure
• Low profile rocker switch
• Completely field repairable

(Click image for more details.)

Features:

• Heavy duty motor - High torque design for easy startup and efficient operation
• Gas ballast - Moisture laden air passing through the pump mixes with relatively dry air to such a degree that compression does not cause condensation
• Offset rotary vanes - Proven design builds a powerful compression within the pumping chamber to reduce system pressure and vaporize moisture so it can be exhausted along with air
• Molded base - Durable polycarbonate base improves pump balance and minimizes vibration during operation
• Die-case aluminum housing - Cast aluminum housings make the pumps lightweight but durable
• Two stage design - Cleans the system more thoroughly than a single-stage pump; the second stage starts pumping at a lower pressure so you can pull a deeper, ultimate vacuum
• Oil fill port - Makes adding oil simple since the port is accessible from the front or either side. The sight glass on the front of the pump shows you when enough oil has been added.
• Oil drain valve - Positioned at the bottom of the oil reservoir and angled for faster, more complete draining

(Click image for more details.)

Portable standalone charging meter designed with the HVAC/R technician in mind. The SSX34 is capable of taking liquid and suction line temperature, pressure, superheat, and subcooling. It comes with a rugged rubber boot and a magnetic hanger to make the technicians job easier.

Features:

• Measures superheat and subcooling
• Works for R22, R410A, R134A, and R404A
• Dual display (shows pressure and pipe temperature, superheat, or subcooling)
• Vacuum to 29" Hg
• Zero adjust for field pressure calibration
• Temperature calibration port on face for field temperature calibration
• "T" fitting allows the user to charge the system to superheat and subcooling without disconnecting anything
• Magnetic hanging strap

(Click image for more details.)

Features:

• Digital read-out
• Manual start/stop
• 110 lb. max

(Click image for more details.)

The Variable Speed Zebra is a microprocessor-controlled tool that performs the following 3 major functions with ECM (variable speed) systems:

• Diagnostics - The Variable Speed Zebra is used in-line, between the furnace control board and the motor
• Control - Exercise the system in any mode the motor can be operated in
• Set-up - Provides a digital readout of a system's CFM and RPM to assist in set-up

The unit includes two DVDs:

• ECM System Theory
• ECM System Troubleshooting

(Click image for more details.)

HVAC high performance vacuum pump - engineered specifically for air conditioning and refrigeration service.

Features:

• High tech high vacuum rating - The two-stage offset rotary vane design provides powerful, quiet high vacuum capability and assures moisture removal, while the high pumping capacity reduces evacuation time
• Lifetime filtration - The intake filter prevents foreign matter from entering the pumping chamber, and an internal exhaust filter separates oil vapor from the exhaust flow
• Compact design & lightweight - Reduced dimensions, just 13 in. long; die-cast aluminum housing; high torque motor; molded board; making it easy to carry
• Safety operation - Precision one-piece, molded handle makes it easy to carry the pump to and from job sites, and the handle stays cool to the touch during operation
• Blower maintenance - VacuMaster pumps use less oil, 7.4 oz. (220 ml); that will reflect in your maintenance costs during the life of the pump

(Click image for more details.)

Temperature and humidity are two important factors in maintaining optimal comfort levels and good indoor air quality. Quickly and conveniently take accurate humidity and temperature readings with the Fluke 971. The Fluke 971 is invaluable for facility maintenance and utility technicians, HVAC service contractors, and specialists who assess indoor air quality (IAQ). Lightweight and easy to hold, the Fluke 971 is the perfect tool for monitoring problem areas. With a rugged holster and twist-open protective sensor cover, the Fluke 971 is built to perform and made to last.

(Click image for more details.)

A compound gauge only indicates that a vacuum is being produced, but does not tell you if moisture or acids are still in the system. The DV-22N, however, is the only tool to accurately read the low pressure produced when evacuation/dehydration is complete.

Features:

• Effective range from 20 - 9,000 microns
• Digital display with solid state circuitry so there is no adjustment necessary for fluctuating temperatures
• 32°F to 120°F (0°C to 48.9°C) ambient temperature
• NIST traceable
• 10 minute automatic power off battery saver
• Saves last vacuum readout after shutdown
• Low battery indicator
• Leak-proof, o-ring quick coupler
• Sealed touch buttons protects against spills and dust
• Retractable hanging hook
• Uses one 9 volt battery (not included)

(Click image for more details.)

The new ATLAS refrigerant charging scale designed for the HVAC/R industry. Everyday users will appreciate the advanced solid-state load cell for superior sensitivity (0.25 oz./10 g) and accuracy. The ATLAS's 220 lb (100 kg) weight capacity, all metal scale construction, heavy duty plastic storage case, and hand held remote combine to make the ATLAS the best overall package in the HVAC/R industry today at a 110 lb price.

Features:

• 220 lb (110 kg) weight capacity for even the largest service jobs
• Solid-state load cell for improved accuracy and sensitivity (accurate to 0.25 oz./10 g)
• All metal scale construction for improved durability and longer service life
• Auto shut-off after 30 minutes to extend battery life of remote

(Click image for more details.)

With Temperature
Compact true-rms meter for HVAC troubleshooting. The Fluke 116 was specifically designed for the HVAC professional. It has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors.

Features:

• Prevents false reading due to stray voltage
• Microamp measurement for accurate flame sensor testing
• Automatic detection of AC or DC voltage simplifies measurements
• True-rms for more accurate readings

(Click image for more details.)

Super-high Intensity LED

Features:

• 10 times brighter than regular LED lights
• Rechargeable/cordless
• Over 6 hours of operation between charges
• Power comparable to super-high intensity 100W lamps
• Inspection range of up to 20 feet (6.1m)
• Powered by rechargeable NiMH battery (included)
• AC charger
• 100,000 hour bulb life
• UVS-40 fluorescence enhancing glasses

(Click image for more details.)

The Fluke 334 clamp meter offers an impressive array of innovative features with a current range up to 600 A.

Features:

• Small body and jaws fit perfectly in your hand and into tight places
• Large, backlit display is easy to see in less than ideal conditions
• Controls positioned for one hand operation
• Inrush current feature measures motor-starting current the way a circuit breaker or overload unit sees it
• Accurate low current measurements
• Auto shut-off
• Display hold
• Includes batteries, test leads, instruction card, safety sheet, and carrying case
• Safety rating: IEC 1010-2-031, 600V CAT III
• Three-year warranty

(Click image for more details.)

Features:

• Temperature range optimized for HVAC/R applications (-40° to 1022°F)
• Measures both non-contact and contact temperature (includes Velcro pipe probe)
• Easy emissivity selector helps measure unpainted pipes and ducts more accurately
• Compatible with standard thermocouple Type K mini-connector probes
• Includes case

(Click image for more details.)

R-22, 134a, 404A, and 410A

The Zeppelin Series aluminum manifold's cutting edge styling and technology have significantly reduced the weight of these manifolds. New handles feature a durable molded "soft grip" rubber that eases opening and closing while improved design means full open in just 2-1/2 turns.

Features:

• 1/4" aluminum 2-valve manifold
• Liquid filled 3-1/8" gauges
• New machined aluminum styling
• New rugged "soft grip" handles with reduced turning to open/close
• Replaceable intake/hose fittings
• Hose holder fittings on back for easy connection in storage
• Ideal for high pressure refrigerants
• Includes sight glass
• Original free floating o-ring
• Heavy duty metal gauge cases
• Made in the USA

Liquid filled gauges - are the toughest liquid filled gauges in the industry - and we back it up with an extended warranty on these gauges. They feature - 1% accuracy - Internal "breathing diaphragm" eliminates air bubbles which can distort the reading - Impact resistant Zytel case - Temperature compensated for changes in case pressure - Internal diaphragm seal to prevent freezing and corrosion - High impact clear view Lexan lens - 1/8" MPT fitting on bottom

(Click image for more details.)

A Manual Ranger Designed for HVAC/R Technicians
More real world capability in one meter

Non-contact voltage:

• Loud beeper and bright LED indicate the NCV tab is near AC voltages greater than 24V

Temperature:

• Thermocouple plugs in directly for accurate readings, even in fast changing environments

Microamps:

• For flame rectifier diode tests

Capacitance:

• For motor-run and motor-start capacitors

And more:

• High voltage indicator you can't miss -- both LED and beeper turn on to indicate you've touched a potentially dangerous voltage
• Continuity indicated by LED and beeper
• MAX hold automatically holds reading so you can look at the meter after you've disconnected
• Low ohm ranges for motor windings and mid range for thermistors
• Amps AC resolution to 0.01A for heat anticipator circuit (20A range). Up to 200AAC with 0.1V resolution (200A range)
• VDC up to 0.01V resolution (20V range)
• Auto-power off to extend battery life

Test leads solutions:

• Probe storage in the back. Just snap them in.
• Single test lead holder for easy and safe voltage testing.
• Silicone test leads remain flexible in cold weather, withstand caustic chemicals, and work well in temperatures that will melt vinyl leads.
• Convenient lead storage. Wrap test leads through clamp to keep wires out of the way. You can even leave them right there when you test amps.

(Click image for more details.)

The VZ-6 (X-Motor Zebra) is a the long-awaited little cousin to the VZ-7; it's a less-expensive alternative for performing accurate diagnostics on X-Motor and ECM 142 Motor Systems.

It does NOT interface with 16-pin signal connector systems, but it DOES include adapters for X-Motors (X-13 and similar motors now made by at least 4 motor manufacturers) and it DOES include adapters for the new ECM Motors now being used as fan motors in better condensing units (The ECM 142 is an example of this motor).

• Diagnostics - The VZ-6 is used in-line, between the furnace control board and the motor
• Control - Exercise the system in any mode the motor can be operated in

The unit includes two DVDs:

• ECM System Theory
• ECM System Troubleshooting

(Click image for more details.)

Titan 2 & 4-valve models:

• Forged aluminum alloy body provides increased strength and reliability
• Lightweight with durability and reliability for repeated use
• Large, 3-1/8" (80mm) steel cased red and blue gauges with bold numbers for easy reading
• Proven, double "O"-ring piston for reliability and long service life
• 100-mesh inline filter to protect against particulate material
• Sight glass to see refrigerant movement and condition
• Heavy duty hook

Titan 4-valve models:

• Fourth hose to enable connection to high/low sides, refrigerant tank, and recovery unit or vacuum pump for diagnostics, evacuation, and charging without switching hoses
• 3/8" vacuum port for use with larger hose to cut evacuation time by up to 33% (all other fittings 1/4")

(Click image for more details.)

This FrostKing defrost timer replaces over 40 competitive models. It is time initiated, temperature, pressure, or time terminated.

Features:

• Independently adjustable trippers allow for full or partial defrost cycles on 15 minute intervals
• Easy multi-voltage field adjustable DIP switch for 120 or 208/240 VAC
• Real-time clock face
• New compact VALOX NEMA 3R outdoor enclosure replaces all metal enclosures
• Red and green LED lights indicate defrost or run cycle
• 40 amp rated contacts
• Large screw terminals for easy wiring #8 AWG
• No tools required! Our "guts" simply snap into existing enclosure.

(Click image for more details.)

The ZebraStat is a low-voltage HVAC/R diagnostic tool with the following primary functions:

• Up to six immediate continuity checks
• Acts as a remote control
• Visually displays signal levels on control lines
• Monitors voltage levels
• Acts as an automatically-resetting circuit breaker

(Click image for more details.)

Features:

• Auxiliary valve port - Allows multiple hookups for vacuum gauge, vacuum pump, recovery unit, and add-ons.
• Dual o-ring seal - For high pressure valve use. Electroless nickel plate stem to reduce wear and galling.
• Precision gauges and protective boots - Unique design with easy to read color coded scales provides superior resistance to shock, vibration, and pulsation for superior performance and extended gauge life.
• PolarShield high performance hoses - 800 psi working pressure, 4,000 psi burst pressure.
• Ergonomic handles - Durable, soft touch non-slip surface, even with oily fingers.
• Swivel hanger

(Click image for more details.)